New infos that could help fix the second part of bug #1065

hardware iso network

fsw · 2026-11-20 17:57 UTC · edited 2026-11-21 15:15 UTC

@pankso: Hi, thank you for opening bug #1065 based on my report 190 (Dell Latitude D630, iwl4965, firefox x86_64 20261110).
You already solved the part of the missing firmware with "Fix: add them to core-x86_64 and firefox-x86_64."

For the second part "Separately, check why Trame cannot install a firmware on the live system.", I just did a second test with the same ISO on the same laptop.

Again, Trame couldn't install the firmware at first (didn't recognize it), but this time, I went to Slitaz Packages, and as I was connected with Ethernet, I clicked "Refresh package lists".

And, voilà! After reopening Trame, it detected the missing "firmware-iwlwifi-4965" and asked to download and install it!
So perhaps the hardware check of Trame should provoke first an automatic refresh of the packages list, if something is missing and there is a connection to the Internet available. Or a warning message asking to do it first...

Note: Still, I couldn't use the Wi-Fi after that with the live ISO! Trame still didn't see it; even with the iwl4965 module correctly loaded, the firmware being available in /lib/firmware and /etc/init.d/network.sh restarted, there was no wlan0...
But I know it works once installed, so I think it's better to wait for the next ISO (with all the updated packages) and then give it another try "en live"...

fsw · 2026-11-21 12:41 UTC

Adding 2 screenshots illustring the differences in Trame hardware, before and after refreshing the packages lists.

Image 1 of this post Image 2 of this post

pankso moderator · 2026-11-22 07:54 UTC · edited 2026-11-22 07:55 UTC

Hello,

Même bug que pour l'heure et c'est réglé. L'interface graphique de Trame lis les sortie de trame (l'outils en ligne de command et scriptable), je test en fr_CH et les séparateur sont des "." en fr_FR et d'autres langues c'est des ",". Du Tram GUI perdait les données.

Dis moi si après un mise à jour, ca fonctionne comme ca devrait.

A plus et bon dimanche ;-)
1 thank you

fsw · 2026-11-22 11:24 UTC

Salut,

Oui, si tu parles de la partie "Matériel" où Trame ne reconnaît pas le processeur et la quantité de mémoire, c'est bien réglé après une installation et une mise à jour (ainsi que l'heure et le fuseau horaire, comme je l'ai indiqué en réponse dans mon autre thread).

Là, ce que je voulais mettre en avant (et aurai peut-être dû entourer de rouge sur les images), c'est la partie "Pilotes et firmware", en fait ;-)

Dans la première image, c'est le premier appel de "Matériel" et on peut voir:
"Pilotes et firmware"
"Son pilote n'est pas encore dans les paquets Slitaz."

Dans la deuxième image, il y a le même onglet, mais après que j'ai mis à jour les listes de paquets (visible en arrière-plan).

Maintenant, cela a changé en :
"Pilotes et firmware"
"Son firmware manque : installer-le pour utiliser cet appareil"

Et un bouton "Installer" a également fait son apparition (reconnaissant effectivement le firmware manquant et permettant son installation).

J'ai vu ce comportement sur 2 machines que j'ai testées : il remarque un firmware manquant, mais ne sait pas l'identifier, et donc ne propose rien à installer => je rafraîchis manuellement les listes de paquets => paf, il me trouve "iwl4965" dans un cas, et "athk10" et "i915" dans l'autre, et me propose l'installation, qui se passe comme prévu.

Donc, c'est pour cela que je me disais que si c'est possible, il faudrait provoquer un rafraîchissement automatique des listes si "Matériel" détecte un firmware manquant (et qu'une connexion à Internet existe), car sans cela, il n'a pas l'air de pouvoir détecter ce qui manque, on dirait bien...


Bon dimanche à toi aussi et à plus !

Log in to reply Sign up